 | | |
| Raimondi Steel Blade Screed / Sand Speader pt.no RA141PASQ
Tempered 9" steel blade, 55cm width, perfect for use when spreading general purpose base materials such as sand, mortar mixture, asphalt etc.
Great for use by Block Pavers & Tilers !!
Supplied as blade only - without pole
Sectional anodised aluminium pole handles listed seperately
Price: £10.70 Excluding VAT at 20%
| | | |
| Raimondi Straight Edge/Screed Bar Handles pt.no RA421
A Pair of Handles perfect for fitting to your straight edge or level
This is a unique way to give your old straight edge, screed bar or level an ergomonic upgrade
The use of these handles creates a superb pulling power rather than relying on tired fingers and thumbs making the surface levelling of mortar screed or sand much easier and less strenuous !!
Minimum height of bar for effective use of Handles is 50mm / 2"
Handles clamp range is for use on bars that are 15 - 35mm thick
Price: £30.90 Excluding VAT at 20%
| | | |
| Kwik Split Aluminium Straight Edge / Screed Bar
The Raimondi Screed Bar Handles are fitted for illustration purposes only. They are NOT supplied with this item and must be bought seperately !!
These Kwik Split Screed Bar / Straight Edges are made from quality high grade Box Section Aluminium and are perfect for professional use by Tilers, Floor Screeders, Block Pavers etc
They are particularly compatable for use with the RA1311 Raimondi Wall Levelling Guide and the Raimondi Handles RA421 as illustrated
Five bar lengths available :- 1.5m, 1.8m, 2.0m, 2.5m, 3.00m
Ally Box Section = H75mm x W25mm
PLEASE NOTE 2.5m & 3m BARS Currently out of stock - please allow 28 days for delivery
| | | |
| Montolit 'Gummy' Hammer / Rubber Mallet
Tilers & Paviours Mallet. Hard rubber head Perfect for aligning and leveling Tiles when lippage occurs
Great for use when laying Block Paving & Modular Slabs
Perfect for use in general construction applications
NON MARKING RUBBER HEAD !
Model 98 ½ Kilo - Model 99 1 Kilo. | | | |
| Montolit Steel Head Lump Hammer
Steel head perfect for dressing paving blocks paving slabs stone & brick materials
Unique anti vibration handle and secure roll pinned head. | | | |
| | Pavers Set
3 Part Pavers Set. Robust set of tools designed for Block Paving Contractors
Consists of SZ Block Extractor - RE Alignment Bar - GH Rubber Sledge Hammer
Price: £184.00 Excluding VAT at 20%
| | | |
| Montolit 3m Steel Tape Measure
Metric Tape Measure. Unique easy read 3m. 'Metric only markings' Steel Tape Measure with robust Plastic and Rubber body.
Comes with locking device and pocket clip Preferred by tilers for ease of use and reading.
Price: £3.10 Excluding VAT at 20%
| | | |
| Montolit Retractable Graphite Pencil
Tilers Marking Pencil. Plastic case graphite Pencil
Comes with pocket clip.
The pencil lead is retractable which can reduce breakage.
Price: £0.85 Excluding VAT at 20%
| | | |
| S Z Paving Block Extractor
The SZ Paving Block Extractor is ideal for use by contractors who carry out repairs to Block Paved surfaces. The spring steel blades are driven into the paver joints. Gripping width 90mm - 300mm is easily adjusted
Price: £103.00 Excluding VAT at 20%
| | | |
| R E Alignment Bar
An essential tool for the Paving contractor the RE Alignment Bar is used to align Paving Blocks before being permanently set by the Vib. Plate.
Price: £57.00 Excluding VAT at 20%
| | | |
| G H Rubber Hammer
Used for easy alignment of paving blocks and slabs before being permanently set by the Vibrating Plate
The ergonomic long handle makes for easy use in an upright position
Price: £47.00 Excluding VAT at 20%
| | | |
| Paver Boy PB BLOCK HANDLE
The Paver Boy Block handle is an excellent hand tool used for the efficient laying of paving blocks and small slabs which cannot be lifted normally with one hand. The PB1 is for use with Paving Blocks and has an opening width of 100 - 170mm & the PB15/24 is ideal for small slabs and similar blocks opening 150mm - 240mm width | | | |
| BZ Kerb Stone Handle
It is recommended that the BZ Kerb Stone Handles should be used in pairs. Perfect for use when placing Kerbs & Edging Stones and easily used for easy handling of a whole host of other related products
Price: £69.00 Excluding VAT at 20%
| | | |
| VZ-1 Two Man Kerb Stone Handles
Gripping along the length of the kerb the 2 Man VZ Lifter is perfect for easy handling of normal concrete Kerb Stones
Price: £198.00 Excluding VAT at 20%
| | | |
| KKT Brick Handle
An efficient handle for carrying bricks & paving blocks. Adjustable opening from 400mm - 670mm.
Price: £57.00 Excluding VAT at 20%
| | | |
| Raimondi Tile & Slab Lifter pt.no RA144
Raimondi 'Perfect Partner' for Lifting or Placing Tiles and Slabs - no more 'Finger End Nipping' !!
Key feature is that this handle will reduce stress to the hands and fingers
Suitable for many applications or type of tile or slab including heavy floor tiles, concrete slabs, terrazzo tiles etc !!
A really useful lifting handle adjustable to the following sizes:-
30/35/40/45/50cm
Price: £17.95 Excluding VAT at 20%
| | | |
| Easy Plan EP- Uni Screed Bar
An essential tool for the Block Layer the EP-Uni Telescopic Blade Screed Bar makes light work of levelling sand surface prior to laying of Paving Blocks
With only one system you can screed different working widths
Available in two sizes the EP-Uni 90/230 screeds working widths 900mm - 2300mm & the EP-Uni 230/300 screeds 2300mm - 3000mm
Various accessories are available as extra's | | | |
| Roller Set for EP - Uni Sreed Bar
Easy fit Roller Set to enable quick and precise levelling of screed sand.
Supplied as a pair and bolts to the end plates of the EP Uni Screed Bar
Price: £160.00 Excluding VAT at 20%
| | | |
| Screed Bar Rail Set AZL - EP Set 25
25 metre Set of Screed Bar Rails to enable quick and precise levelling of screed sand.
Brilliant for use together with the EP Uni Screed Bar
Rails included :-
qty4 Rails @ 3m each
qty4 Rails @ 2.5m each
qty2 Rails @ 1.5m each
Price: £245.00 Excluding VAT at 20%
| | | |
| VTK-V Clamp Block Cart
The VTK-V Block Cart is designed for easy movement of bound or loose Paving Blocks
The gripping width 550mm - 1050mm is easily adjustable & Blocks can be loaded from the pallet without the need of a ramp.
Price: £791.00 Excluding VAT at 20%
| | | |
| PWP Pallet Cart
Two variations of the PWP Pallet cart are available and both are suitable for the movement of building products that are stacked on a pallet
Position the forks of the PW 1 (carrying capacity 1400kg) & under the pallet & then attach the rear wheels.
All are lifted by a hydraulic jack.
The PW3-UK (carrying capacity 1500kg) has adjustable forks & the pallet is approached from the side
Easy movement is enhanced because all pallet carts are fitted with large rubber wheels | | | |
|
|
| | |
|
