 | | | Products > Lifting & Manual Handling Equipment
| PPH EXTENDED Handle Slab and Block Lifter
The PPH Extended Handle Slab Lifter is ideal for use by contractors who need to lay slabs or carry out repairs to paved areas in many locations including shopping precincts, footways etc. The item is of robust construction and is ideal fo use with 'modular paving' sizes 400/450mm. The handles extend over the side of the slab making it ideal for two man use.
Also perfect for lifting / placing heavy 230mm/9" building blocks or for any other similar material.
Gripping width 300mm - 620mm and is easily adjusted without tools
Price: £75.50 Excluding VAT at 17.5%
| | | |
| Raimondi Tile & Slab Lifter pt.no RA144
Raimondi 'Perfect Partner' for Lifting or Placing Tiles and Slabs - no more 'Finger End Nipping' !!
Key feature is that this handle will reduce stress to the hands and fingers
Suitable for many applications or type of tile or slab including heavy floor tiles, concrete slabs, terrazzo tiles etc !!
A really useful lifting handle adjustable to the following sizes:-
30/35/40/45/50cm
Price: £17.95 Excluding VAT at 17.5%
| | | |
| Universal Handles BVZ
BVZ Universal Handle. The BVZ Two Man Lifter is ideal for lifting & positioning many types of landscaping products including kerb & edging stones, granite blocks etc
Price: £184.00 Excluding VAT at 17.5%
| | | |
| Pavers Set
3 Part Pavers Set. Robust set of tools designed for Block Paving Contractors
Consists of SZ Block Extractor - RE Alignment Bar - GH Rubber Sledge Hammer
Price: £184.00 Excluding VAT at 17.5%
| | | |
| S Z Paving Block Extractor
The SZ Paving Block Extractor is ideal for use by contractors who carry out repairs to Block Paved surfaces. The spring steel blades are driven into the paver joints. Gripping width 90mm - 300mm is easily adjusted
Price: £103.00 Excluding VAT at 17.5%
| | | |
| | P Z Slab Extractor
The PZ Slab Extractor is ideal for use by contractors who need to carry out repairs by extracting slabs in many locations including shopping precincts, footways etc. The item is of robust construction which enables the high quality double sprung steel blades to be hammered into the gap between the paver joints.
Gripping width between 200mm - 610mm is easily adjusted without tools
Replacement blades for this item are the same as the SZ extractor blade! See the S Z replacement blade listing
Price: £159.00 Excluding VAT at 17.5%
| | | |
| R E Alignment Bar
An essential tool for the Paving contractor the RE Alignment Bar is used to align Paving Blocks before being permanently set by the Vib. Plate.
Price: £57.00 Excluding VAT at 17.5%
| | | |
| | KKT Brick Handle
An efficient handle for carrying bricks & paving blocks. Adjustable opening from 400mm - 670mm.
Price: £57.00 Excluding VAT at 17.5%
| | | |
| Paver Boy PB BLOCK HANDLE
The Paver Boy Block handle is an excellent hand tool used for the efficient laying of paving blocks and small slabs which cannot be lifted normally with one hand. The PB1 is for use with Paving Blocks and has an opening width of 100 - 170mm & the PB15/24 is ideal for small slabs and similar blocks opening 150mm - 240mm width | | | |
| G H Rubber Hammer
Used for easy alignment of paving blocks and slabs before being permanently set by the Vibrating Plate
The ergonomic long handle makes for easy use in an upright position
Price: £47.00 Excluding VAT at 17.5%
| | | |
| PWP Pallet Cart
Three variations of the PWP Pallet cart are available and all suitable the movement of building products that are stacked on a pallet
Position the forks of the PW 1 (carrying capacity 1400kg) & PW 11 (carrying capacity 2000kg) under the pallet & then attach the rear wheels.All are lifted by a hydraulic jack.
The PW 111 (carrying capacity 1500kg) has adjustable forks & the pallet is approached from the side
Easy movement is enhanced because all pallet carts are fitted with large rubber wheels | | | |
| BZ Kerb Stone Handle
It is recommended that the BZ Kerb Stone Handles should be used in pairs. Perfect for use when placing Kerbs & Edging Stones and easily used for easy handling of a whole host of other related products
Price: £69.00 Excluding VAT at 17.5%
| | | |
| | VZ-1 Two Man Kerb Stone Handles
Gripping along the length of the kerb the 2 Man VZ Lifter is perfect for easy handling of normal concrete Kerb Stones
Price: £198.00 Excluding VAT at 17.5%
| | | |
| Vacuum Handy model VH 1/25 and model VH 2/50
This is a cheap solution to install non porous slabs using vacuum. The vacuum is easily produced by pressing the device down on to the slab. The suction is released by opening a simple valve using your finger
The Vacuum Handy VH 1/25 is operated by one man for the movement and laying of lightweight slabs. It provides accurate and quick installation with no gap between slabs. It's design ensures a good ergonomic working position when laying slabs. It can be used to lift prelaid slabs. The sealing ring is robust and can easily be changed in a matter of seconds without the need for glueing.
Carrying capacity for this tool is 25kg
Purchase the additional handle to make the tool into the Vacuum Handy VH 2/50 allowing for two person operation
The two man operated Vacuum Handy VH 2/50 is the same item as detailed above but is supplied with a two person handle which makes it suitable for heavier loads up to 50kg
The suction plate diameter for both models is 280mm
| | | |
| Vacuum Power Handy VPH 75 Lifter
The Vacuum Power Handy VPH 75 is ideal for laying dense products such as slabs and kerbs
Powered by a 12v rechargeable battery the VPH is a vacuum suction handle with a maximum carrying capacity of 75kg
Various suction plates are available for different applications
Price: £930.00 Excluding VAT at 17.5%
| | | |
| Replacement SEAL for VPH 75
Easy change Standard Base Plate Seal for the VPH 75 Vacuum Power Handy.
Price: £70.00 Excluding VAT at 17.5%
| | | |
| Vacuum Power Handy VPH 150 Lifter
The Vacuum Power Handy VPH is ideal for laying dense products such as slabs and kerbs
Powered by a 12v rechargeable battery the VPH 150 is a vacuum suction handle with a maximum carrying capacity of 150kg
Various suction plates are available for different applications
Price: £1,374.00 Excluding VAT at 17.5%
| | | |
| | | | | | Vacuum Stone Magnet SM - Base Unit inc. charger
Specially designed for heavy duty Site work the SM Stone Magnet is a machine mounted cordless 12v battery powered vacuum lifting device perfect for laying dense stone or concrete slabs and other types of paving materials
The Base Unit is NOT supplied with any suction plate. Suction plates are ordered seperately to suit the size and weight of the material to be lifted
The SM Stone Magnet Vacuum Lifter is illustrated with the kerb stone plate attached
The standard suction plate pt.no. SPS 200 SM is designed to lift up to 200kg capacity - size is 580 x 280mm
The 400kg lifting plate pt.no. SPS 400 SM size is 750 x 270mm
Various other size plates are available for lifting heavier materials & kerbs
Usually we can provide a plate for your specific size material
Please call us with the measurement and weight of the material to be lifted
Price: £1,970.00 Excluding VAT at 17.5%
| | | |
| Suction BASE Plates for Vacuum SM Stone Magnet
Illustrated are two of the standard Suction Plates available for fitting to the Stone Magnet SM vacuum lifter
Suction plates must be ordered seperately to suit the size and weight of the material to be lifted
The standard suction plate pt.no. SPS 200 SM is designed to lift up to 200kg capacity - size is 580 x 280mm
The 400kg lifting plate pt.no. SPS 400 SM size is 750 x 270mm
Various other size plates are available - see the 'drop down list' !
All plates are fitted with Easy Change Seals !
Usually we can provide a plate for your specific size material
Please call us with the measurement and weight of the material to be lifted if the plate sizes detailed in the drop down list do not match your requirements
| | | |
| | | T S Z Uni Concrete Step and Kerb Handle
Specially designed for heavy duty Site work the TSZ - uni is a versatile machine mounted lifting grab perfect for handling dense stone steps, kerb stones, L - stones and other types of construction materials
The grab has a large opening range which is easily adjustable by a spring loaded bolt
Conical kerb stones are also gripped securely as the gripper has an inside height of 180mm enabling the unit to grip underneath the conical form
Standard specifications include:
A Lifting Eye for attaching to crane hook
Automatic release for the fully automatic switch over from 'full' to empty'
Exchangeable rubber grippers
Galvanised finish
Opening width = 50 - 570mm Inside height = 185mm Gripper length = 350mm Carrying capacity = 500kg
Price: £504.00 Excluding VAT at 17.5%
| | | |
| VTK-V Clamp Block Cart
The VTK-V Block Cart is designed for easy movement of bound or loose Paving Blocks
The gripping width 550mm - 1050mm is easily adjustable & Blocks can be loaded from the pallet without the need of a ramp.
Price: £791.00 Excluding VAT at 17.5%
| | | |
|
Products > Lifting & Manual Handling Equipment
|
| | |
|
